Millimeter wave radar (special specification vertical surface adsorption type) 2-axis separate type inclinometer, 1-axis digital level
Millimeter wave radar installed in advanced anti-collision vehicles must be mounted at an exact angle to the front of the vehicle. The millimeter wave radar vertical surface adsorption type inclinometer is an inclinometer that is adsorbed on the front face of the millimeter wave radar to measure and inspect the vertical angle (pitch angle) of the millimeter wave radar.
When measuring by pressing down on the tiltmeter measuring section by hand, variations in the pressing force can cause variations in the deflection of the bumper, which can result in inaccurate measurements. To solve this problem, a small suction pump is used to generate a constant negative pressure, which is then adsorbed to a vertical surface with a stable force to enable accurate angle measurement.
Features
01 The inclinometer is equipped with a 2-axis acceleration sensor, and the level is a compact 1-axis horizontal sensor.
02 Strongly adheres to vertical measurement surface with suction pad for precise measurement.
03 Pressure sensor monitors the state of correct suction setting.
04 Vibration-proof and lightweight design
05 Inclinometer accuracy 0.1deg. or less, level accuracy 0.01deg. or less
Spec
●Specifications for Millimeter Wave Radar Vertical Frontal Adhesion Wired Inclinometer
| Measuring range | ±45.0 degrees |
| Accuracy (repeat) | ±0.1 degrees (±10.0 degrees) |
| Resolution | 0.01 degrees |
| Response Speed | Approx. 200ms or less |
| Power source | Ni-MH rechargeable battery 12V 2200mAh |
| Operating temperature/humidity range | 10 to 40°C (theoretical), 25 to 85%RH (no condensation) |
| Storage temperature/humidity range | -10 to 75°C (theoretical), 20 to 90%RH (no condensation) |
| Sensor mass, dimensions | Adhesive pad type 40g |
| Monitor section weight, dimensions | W138✕H69✕D190 (mm), 1.2 kg (including batteries) |
●Specifications for Millimeter Wave Radar Vertical Front Adhesive Type Wireless Level
【Transmitter Side】
| Transmission method | Data transmission by weak radio wave Unidirectional |
| Frequency | 310.24 to 314.74 MHz (10 CH variable) |
| Data rate | 1200 bps |
| Transmission output | 0.75 mW (*1) |
| Reaching distance | 6m in a clear line of sight (*2) |
| Control Method | One-chip microcomputer |
| Angle measurement range | ±1.0°C |
| Angle resolution | 0.0000184 degrees |
| Measurement range over display | OVER indicator blinks when ±0.3 degree or more |
| Battery Life | CR2 +3V |
| Battery life | - |
| Shape | 70Φ✕H45 |
| Weight | - (varies depending on the jig base) |
※1. The electric field strength at a distance of 3m is set at 500uV/m in accordance with the Radio Law.
※2. Reaching distance varies greatly depending on the environment and conditions at that time.
【Receiver side】
| Dimensions | W96✕H180✕D45 |
| Weight | |
| Power supply | Dedicated adapter (6V/2A) or 4 AA batteries (1.5V),USB power supply (5V) |
| Radio | Weak radio frequency 310.24 to 314.74 MHz (10 CH variable) |
| Communication speed | 1200 bps |
| Antenna | 1/4λ antenna |
| Display | Graphic LCD 160✕160 dots |
| PC I/F | USB 1ch |
| Measuring range | ±0.3 degree |
| Operating Temperature | 0 to 40°C (32 to 104°F) |
| Operating Humidity | 25% to 80%RH (no condensation) |
| Battery Life | 4 hours continuous operation (backlight off) |
